Suitable for

Clinically validated for use during pregnancy, pre-eclampsia and for those with Type 2 diabetes.

How to use

How to use:
Please read the instruction manual before using this product for full set up and usage instructions.  
After installing batteries, and setting date and time:

Apply the cuff:

• • After removing all jewellery such as watches or bracelets from your left arm, roll or push up your sleeves to expose the skin. Make sure your sleeve is not too tight, if so remove any tight-fitting or thick clothing from your arm while you take a measurement.

• • Plug the arm cuff into the monitor by inserting the air plug into the air jack securely until it clicks.

• • Apply the arm cuff to your upper left arm, with the bottom edge of the arm cuff 1-2cm above the inside elbow. The air tube should be on the inside of your arm and aligned with your middle finger.

• • Then wrap the cuff securely.

Start the Measurement (without pairing to a smart device):
1. Select your user ID – 1 or 2.
2. When the monitor is off, press the START/STOP button to turn on the monitor.  The measurement will start automatically. The ‘OK’ symbol appears on the display if the arm cuff is wrapped around the arm correctly.
3. Remain still and do not talk until the ensure measurement process is complete. After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates.
4. Press the START/STOP button to turn your monitor off.
To use the Afib function:
The Afib functionality will take 3 measurements, before showing an average on the display. If Afib is detected, a symbol will appear.
1. Select your user ID – 1 or 2.
2. When the monitor is off, press the START/STOP button to turn on the monitor and hold for more than 2 seconds. ‘RF’ will appear on the display. Release the START/STOP button.
3. The measurement will start automatically. Remain still and do not talk until the ensure measurement process is complete. After the first measurement is complete, wait for the next measurement to start. A 30 second counter will appear on the display. After the second measurement is complete, wait for the final measurement to start. A 30 second counter will once again be displayed.
4. After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates and the average measurement is displayed. The relevant Afib symbol will appear on the display if Afib is detected.
5. Press the START/STOP button to turn your monitor off.

Start the Measurement (paired to a smart device):
1. Enable Bluetooth on your device, and download the ‘OMRON connect’ app.
2. Open the app, create an account or log in, and pair to your device by following the instructions.
3. Confirm your monitor is connected – an ‘OK’ symbol will appear on the monitor display.
4. Press the START/STOP button to turn your monitor off.
5. When the monitor is off, press the START/STOP button to turn on the monitor.  The measurement will start automatically. The ‘OK’ symbol appears on the display if the arm cuff is wrapped around the arm correctly.
6. Remain still and do not talk until the ensure measurement process is complete. After your monitor has detected your blood pressure and pulse rate, the cuff automatically deflates. When Bluetooth is enabled on both your smart device and your monitor, the readings will transfer to your device within 1 hour of taking a measurement.
7. Press the START/STOP button to turn your monitor off.

Hazards and Cautions

Warnings: 
Keep out of reach of children.